RUCKUS T710 Specification |
|
|
WI-FI |
|
| Wi-Fi Standards | IEEE 80211a/b/g/n/ac Wave 2 |
| Supported Rates | 80211ac: 65 to 1,733Mbps (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80)
80211n: 65Mbps to 600Mbps (MCS0 to MCS 31) 80211a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps 80211b: 11, 55, 2 and 1 Mbps |
| Supported Channels | 24GHz: 1-13
5GHz: 36-64, 100-144, 149-165 |
| MIMO | 4×4 SU-MIMO
4×4 MU-MIMO |
| Spatial Streams | 4 SU-MIMO
3 MU MIMO |
| Radio Chains and Streams | 4×4:4 |
| Channelization | 20, 40, 80MHz |
| Security | WPA-PSK, WPA-TKIP, WPA2-Personal, WPA2-Enterprise, WPA3-Personal, WPA3-Enterprise, AES, 80211i, Dynamic PSK
WIPS/WIDS |
| Other Wi-Fi Features | WMM, Power Save, Tx Beamforming, LDPC, STBC, 80211r/k/v
Hotspot Hotspot 20 Captive Portal WISPr |
|
RF |
|
| Antenna Type | BeamFlex+ adaptive antennas with polarization diversity
Adaptive antenna that provides over 4,000 unique antenna patterns per band |
| Antenna Gain (max) | Omni -Up to 3dBi
Sector -Up to 8dBi |
| Peak Transmit Power (aggregate across MIMO chains) | 24GHz: 28dBm
5GHz: 28dBm |
| Minimum Receive Sensitivity | -104dBm |
| Frequency Bands | ISM (24-2484GHz)
U-NII-1 (515-525GHz) U-NII-2A (525-535GHz) U-NII-2C (547-5725GHz) U-NII-3 (5725-585GHz) |
|
Other Radio Technologies |
|
| GPS | Types GLONASetc |
|
Physical Interfaces |
|
| Ethernet | 2 x 10/100/1000 Mbps ports, RJ-45
LACP |
| Fiber | SFP, 1Gbps, NBASE-x |
|
Physical Characteristics |
|
| Physical Size | 317(L) x 241(W) x 95(H) cm
125(L) x 949(W) x 37(H) in |
| Ingress Protection | IP-67 |
| Mounting | Pole Mount
Wall Mount Flat Surface Bracket included in the box |
| Operating Temperature | -40°C (-40°F) to 65°C (145°F) |
| Operating Humidity | Up to 95%, non-condensing |
| Wind Survivabiity | Up to 266km/h (165mph) |
|
Ruckus Radio Management |
|
| Antenna Optimization | BeamFlex+
Polarization Diversity with Maximal Ratio Combining (PD-MRC) |
| Wi-Fi Channel Management | ChannelFly
Background Scan Based |
| Client Density Management | Adaptive Band Balancing
Client Load Balancing Airtime Fairness Airtime-based WLAN Prioritization |
| SmartCast Quality of Service | QoS-based scheduling
Directed Multicast L2/L3/L4 ACLs |
| Mobility | SmartRoam |
| Diagnostic Tools | Spectrum Analysis
SpeedFlex |
|
Networking |
|
| Controller Platform Support | SmartZone
ZoneDirector Cloud Standalone |
| Mesh | SmartMesh™ wireless meshing technology Self-healing Mesh |
| IP | IPv4, IPv6 |
| VLAN | 8021Q (1 per BSSID or dynamic per use based on RADIUS
VLAN Pooling Port-based |
| 8021x | Authenticator & Supplicant |
| Tunnel | L2TP, GRE, Soft-GRE |
| Policy Management Tools | Application Recognition and Control
Access Control Lists Device Fingerprinting Rate Limiting |
|
Performance And Capacity |
|
|
Peak PHY Rates |
24GHz: 600Mbps
5GHz: 1733Mbps |
|
Client Capacity |
Up to 512 clients per AP |
|
SSID |
Up to 31 per AP |
